Advanced Network Packetmaster

  • Product Capabilities / Features


    Number of Ports 48 x SFP/SFP+ 1/10 Gbps; 2 x QSFP/QSFP28 40/100 Gbps; QSFP/QSFP28 ports can be used in break-out mode supporting 4 x 10/25 Gbps
    Link/Port Aggregation 1:1; 1:n; n:1; n:n - at all port/link speeds
    Traffic distribution/load balancing Traffic can be easily distributed to single ports, parallel ports or load-balancing groups
    • Up to OSI Layer 4 including MAC, VLAN, Ethertype, VXLAN VNI, IPv4/IPv6, DSCP, Protocol type, Layer 4 Port Numbers
    • Multiple stage filtering (ingress, egress and loopback ports)
    • Regex filtering to search for ASCII strings and/or Hex pattern in complete packets
    Tunnel Termination and inner tunnel filtering
    • Generic pattern removal via offset and length
    Packet Slicing Supported at all ports and port speeds for any user selectable packet size
    Deduplication Supported at all ports and port speeds
    Data masking Overwrite any part of a packet to comply with GDPR regulations
    Netflow generation v5 and v9 supported
    Throughput / Latency Non-blocking architecture with 1360 Gbps throughput
    Latency < 700ns
    Buffer 24 Mbyte with intelligent buffer management to avoid congestion due to micro-bursts
    Supervision/Logging SNMPv2c and SNMPv3; Syslog and Activity Log function
    Unit Control WebUI via https and RestAPI via 10/100/1000B-T management interface
    MTBF 178213 hours
    Electrical Power Dual 100-240 V AC or 36-72 V DC available

    Other advanced Features

    Due to its multi-core ARM CPU and the special software suite included, the EXA48200 takes network visibility to the next level by supporting:

    • Data-masking to protect sensitive data and comply with GDPR
    • TCP Re-ordering function
    • Offset Stripping for maximum flexibility when headers need to be removed; it can also be used as packet slicing function for any packet size
    • Full ACL filtering capabilities
    • Netflow generation (v5 – v9)
    • VLAN (up 15 tags), MPLS (up to 15 labels), GRE, VXLAN (up to 2 VNIs) stripping
  • Technical Data / Specification


    • 48 x 1 Gbps / 10 Gbps full duplex SFP Ports for any kind of SFP/SFP+
    • 2 x 40 Gbps / 100 Gbps full duplex Ports for any kind of QSFP/QSFP28
    • *Each port can be input and / or output depending on the application and configuration
    • *All QSFP/ QSFP28 ports support breakout cables to 4x10G or 4x25G interfaces


    • 48 x 1 Gbps / 10 Gbps full duplex SFP Ports for any kind of SFP/SFP+
    • 2 x 40 Gbps / 100 Gbps full duplex Ports for any kind of QSFP/QSFP28
    • *Each port can be input and / or output depending on the application and configuration
    • *All QSFP/ QSFP28 ports support breakout cables to 4x10G or 4x25G interfaces


    • Performance up to 1,36 Tbps
    • Non-blocking design
    • Boot time from power on to working 180 sec


    • Management Port: (1) RJ45 10/100/1000 Mbit Configuration

    Operating specifications

    • Operating Temperature: 0ºC to 40ºC
    • Storage Temperature: -10ºC to 70ºC
    • Relative Humidity: 10% min, 95% max (non-condensing)

    Mechanical specifications

    • Dimension (WxDxH): 444 x 565 x 44 mm
    • Weight: 12,1 kg
    • Airflow: Front-back

    Electrical specifications

    • Input Power: 100-240V
    • Maximum Power Consumption: 220W
    • Power Supply Module: 2 (redundant & hot- swappable)


    • Compliance and Safety: EN 61000-3-2:2019; EN 61000-3-3:2013/A1:2019;
    • EN 62368-1:2014; EN 55035/2017/A11:2020;
    • EN 55032:2015/A1:2020
    • EU Directives compliance:2014/35/EU and 2014/30/EU
    • RoHs Compliance: RoHS 6
  • Applications / Solutions


    The EXA48200 is able to receive traffic from a single or multiple 1/10/40 or 100 Gbps link(s) viathe monitoring ports of an inline tapping device. The incoming traffic can be further aggregated to a single or multiple outputs to connect analyzers and monitoring tools as required. The example below shows how EXA48200 aggregates upstream and downstream traffic of a 100 Gbit link to a single output port for more economical usage of connected traffic probes/analytics systems.

    roadmap testing google optimize

    By utilizing the various filtering capabilities of the EXA48200 the user is able to further reduce traffic volume that needs to be processed, thus enabling quicker and more accurate analysis and troubleshooting. Moreover, incoming traffic can be VLAN tagged per physical port to allow easy identification at which physical port a packet original arrived.

    More information about out 100Gbit Aggregation Solution

    Superior filtering capabilities

    The Packetmaster EXA48200 supports up to 16000 parallel running filters. These filters can be used to redirect a selected part of the incoming traffic to a low bandwidth monitoring tool. Filtering parameters include:

    Layer 2 Layer 3 Layer 4
    MAC Src / Dst MPLS Label Port Src / Dst
    VLAN tag IPv4 Src / Dst TCP Flag
    Ethertype IPv6 Src / Dst  

    Besides standard OSI L2 to L4, the EXA48200 also supports filtering inside tunnels like GTP, VXLAN or GRE – see next section for details. By default, filtering is done at ingress but can be easily extended to egress as well as loopback ports allowing maximum flexibility to forward the right traffic to the right probing/analyzer system.

    State-of-the-art tunnel removal and inside tunnel filtering

    The EXA48200 supports the termination of various tunnels such as:

    • ERSPAN II and III
    • GRE
    • MPLS over UDP
    • GTP
    • VXLAN
    • CFP
    VXLAN tunnel functionality with a Cubro Network packet Broker

    Every port of the EXA48200 supports an independent MAC and IP setup. Thus, the EXA48200 can be used as an active tunnel end-point. Besides tunnel termination, it also allows filtering inside tunnels. This superior functionality makes the EXA48200 perfectly suited for any modern overlay network.

    GRE Encapsulation Function

    To transport filtered packets from site A to site B over a routed Layer 3 network, the EXA48200 supports a GRE encapsulation function.

    Session-aware load-balancing

    The Cubro EXA48200 supports Session-Aware Load balancing that allows every packet belonging to the same conversation/flow to be sent to the same physical output port within a load-balancing group.

    Visit our Session-aware load-balancing solution page for more informtion


    The EXA48200 is capable of finding and deleting duplicate packets. Please visit our page of Deduplication to know more about this solution.

    Regex Filtering

    The Regex filter function of the EXA48200 is the perfect solution to find packets that can not be found by using usual L2 to L4 packet parameters like IP Address, Protocol or UDP/TCP port number.

    Here are more information about our Regex Filtering solution

    IP Reassembly function

    IP fragmentation breaks packets into smaller pieces (fragments), therefore, the resulting pieces can pass through a link with a smaller maximum transmission unit (MTU) than the original packet size. The fragments are reassembled by the receiving host. Fragmentation might cause troubles for monitoring tools or will need additional processing resources of the tool to reassemble the fragments. The EXA48200 keeps monitoring tools clear by providing an easy-touse reassembly function.

  • Easy Operation with low learning curve


    The EXA48200 features an extremely easy to use graphical way of operation. The innovative and logical WebUI allows the user to create a backup, setup new users, check port link status/statistics or define a powerful filtering scenario which will help to do the job quickly.


    screenshot of a web user interface


    screenshot of a web user interface
  • Ordering information


    Product Components

    • Cubro EXA48200
    • AC or DC power supply modules
    • Power cord
    • Transceivers not included


    Part Number Description
    CUB.APM-EXA48200-12 Advanced Packetmaster EXA48200, 12x1G/10G and 2x40G/100G, Dual AC powered
    CUB.APM-EXA48200-24 Advanced Packetmaster EXA48200, 24x1G/10G and 2x40G/100G, Dual AC powered
    CUB.APM-EXA48200-36 Advanced Packetmaster EXA48200, 36x1G/10G and 2x40G/100G, Dual AC powered
    CUB.APM-EXA48200-48 Advanced Packetmaster EXA48200,48x1G/10G and 2x40G/100G, Dual AC powered
    CUB.APM-EXA48200-12-DC Advanced Packetmaster EXA48200,12x1G/10G and 2x40G/100G, Dual DC powered
    CUB.APM-EXA48200-24-DC Advanced Packetmaster EXA48200, 24x1G/10G and 2x40G/100G, Dual DC powered
    CUB.APM-EXA48200-36-DC Advanced Packetmaster EXA48200, 36x1G/10G and 2x40G/100G, DC powered
    CUB.APM-EXA48200-48-DC Advanced Packetmaster EXA48200, 48x1G/10G and 2x40G/100G, DC powered