Media Converter

The Cubro Media Converters are complete and versatile solutions for applications such as FTTx, CWDM and carrier Ethernet. All Cubro Media Converters are equipped with LEDs that display the status of each port in real-time, thus allowing users to view the network status easily. Cubro Media Converters provide an easy-to-access management web page, which allows users to view system status, counters and network statistics.

Main Features of Media Converter

  • Supports a wide variety of protocols, data rates and media types to create a more reliable and cost-effective network
  • Reduces network operating costs by helping to troubleshoot
  • Saves time and money when there is not a network administrator at the distant location.

Functions & Benefits of Media Converter

  • Converts one media type into another media type, the most common use is optical to electrical. The media converter enables fibre to the desktop.
  • Provides fibre-to-fibre conversion from multi-mode fibre to single mode fibre
  • Enables amplification of poor signals to work over longer distances, this is a useful option especially in multimode fibre networks
  • Converts dual fibre to a BiDi system with only one fibre to double the bandwidth of the installation.
  • Converts from one CWDM wavelength to another wavelength.

  • Product Capabilities

    empty line

    Media Conversion You can select the media by changing the SFP. The unique design supports also CWDM / DWDM and BiDi SFP
    Supported SFP and SFP+ Gbit optical single mode Gbit optical multimode 10 Gbit optical single mode 10 Gbit optical multimode Gbit electrical STM1 - STM 64 optical OTN (OTU1, OTU2, OTU1e, OTU2e) Fibre Channel STM1/OC3 - STM64/OC192. We support any MSA conform SFP & SFP+
    Full Duplex support The unit supports full duplex in line speed
    Zero delay (500 ps = 10 cm cable) The unit does not add any delay or jitter/wander to the traffic.
    Layer 1 to Layer 7 transparent All packets pass the unit without any change.
    Jumbo Frame Support Supports jumbo Ethernet frames with any size.
    Rugged metal housing The unit is delivered in a rugged sized metal housing. Very slim form factor 100 x 55 x 27 mm.
    Power Versions The Media Converter comes with a 5V DC external power supply or can be supplied with a USB adapter. Power consumption depends on the used SFPs and ranges from 500 mA for Gbit up to 1.5 A for 10 G. USB power can only be used with Gbit SFPs.


  • Technical Data / Specification

    Operating specifications

    • Operating Temperature: 0ºC to 40ºC
    • Storage Temperature: -10ºC to 70ºC
    • Relative Humidity: 10% min, 95% max, Non-condensing

    Mechanical specifications

    • Dimensions: 27 mm Heigth x 100 mm Depth x 55 mm Width

    Electrical specifications

    • 5V DC external power supply or USB adapter
    • Power consumption is SFP dependent
    • Typical 500 mA for Gbit up to 1500 mA in 10 Gbit.

    Certifications

    • Fully RoHS compliant
    • CE compliant


  • Applications / Solutions

    Media Conversion

    You can select the media by changing the SFP. The unique design supports also CWDM / DWDM and BiDi SFP.

    Media Conversion (USB Power)

    With this feature, it is easy to connect a standard laptop to a switch with optical interfaces. Because of the low power consumption, it is possible to power the Cubro Media Converter 10 G from the USB port of the laptop.

    Amplification

    You can enlarge the transfer range of your media dramatically without risking errors on your data. The examples below show some common options, but a lot more combinations are possible.

    Amplification for monitoring

    It is very common to use optical splitters to monitor the traffic in a network, but a splitter also reduces the optical power on the active link. Especially in multimode networks with higher bandwidths (10 Gbit), this could cause transmission problems. You can overcome this problem by using a Cubro Media Converter 10 G for amplification.

    Wavelength conversion on a DWDM / CWDM System

    With the Cubro Media Converter 10 G and a Cubro MUX / DEMUX, you have the possibility to change wavelength in a DWDM / CWDM system. This flexible device is extremely cost-effective.

    Monitoring Traffic in a DWDM / CWDM System

    With the Cubro Media Converter 10 G and a Cubro MUX / DE¬MUX, you have the possibility to look into a DWDM/ CWDM system and analyze the data.

    Layer 1 loop for testing devices

    This is not an everyday application, but it shows the flexibility of the Cubro Media Converter 10G. If you only have one tester and you had to test on copper Gbit links, you can use the media converter to make a layer 1 loop.

    Asymmetric delay for testing devices

    To test applications, it is sometimes useful to simulate asymmetric delay. Asymmetric delay can be done with expensive instruments as well, but if you need just a simple solution, you can use two MeDiCon 10 G and two different fibres in length. In our example, you get an asymmetric delay in the range of 70 μsec. Longer fibres produce longer delay.


  • Ordering information

    Part Number Description
    CBR.MEDSFP Mini Media Converter up to 10 Gbit, SFP(+) to SFP(+)
    CBR.MEDSFP-KIT Mini Media Converter up to 10 Gbit, SFP(+) to SFP(+), Set including SFPs (1x GBIT Copper, 1x GBIT SM and 1x GBIT MM)

Looking for product support?

Get in touch with our technical team now

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.