Items tagged with UP TO 100 MBIT

10/100/1000 Mbit Copper Tap flex

10/100/1000 Mbit Copper Tap flex

  • fully passive
  • Carrier Grade Design
  • 10/100/1000 Mbit
  • 19' rack mountable (20 units in one 3 U 19' frame)
  • Port Bandwitdh: 10 Mbit | 100 Mbit | 1 Gbit
  • Part Nr #: CBR.FLEX-T1000
10/100 Mbit Copper Tap flex

10/100 Mbit Copper Tap flex

  • fully passive
  • Carrier Grade Design
  • 10/100 Mbit
  • EN 50129 European Railway certification
  • 19' rack mountable (20 units in one 3 U 19' frame)
  • Port Bandwitdh: 10 Mbit | 100 Mbit
  • Part Nr #: CBR.FLEX-T100
10/100 Mbit passive Copper Tap

10/100 Mbit passive Copper Tap

  • fully passive
  • Carrier Grade Design
  • 10/100 Mbit
  • EN 50129 European Railway certification
  • Port Bandwitdh: 10 Mbit | 100 Mbit
  • Part Nr #: CBR.TAP-10/100

Cubro Solutions

100 Gbit LR4 multiple splitting

Sometimes it is needed to tap a 100 Gbit LR4 link more than one time, this is not easy because the optical budget is too small to do that.

GRE de - encapsulation

Virtual environments needs virtual Taps, virtual Taps need GRE to send it over the virtual switchto a real monitoring device. All Packetmaster units can decapsulate GRE traffic to get the data in their original format.

Packetmaster as Patchfield

The Packetmaster EX can be used as intelligent patch field. This is feature is possible because the EX has no designated in and out port configuration. Each port is an input and an output at the same time.

Layer 1 Media Conversion

The Cubro 1/10 Gbit Media converter is a nice a simple tool to solve many problems in the daily network business. You can select the media by changing the SFP. The unique design supports also CWDM / DWDM and BIDI SFP.

EX2 10 Gbit monitoring with load balanced output

Use the integrated optical TAP to connect to the live link and use the load balancing features to monitor the traffic

Aggregation of two 10 Gbit span ports to 1 10 Gbit output with EX2+

This application is normally not possible because the EX2+ has only two 10 Gbit ports and you need 3 to do this job.  But we at Cubro give our units some extra features to do this with two ports.

A optical ports has an transmitter and a receiver part, this two “ports” can be used separately in all Cubro NPB. The other feature what you need is the optical tap at the back.

Aggregation of an 10 Gbit link and output to an 10 Gbit port

Aggregation of one 10 Gbit link with optical splitter to 10 Gbit fibre output

Amplification

You can enlarge the transfer range of your media dramatically without risking errors on your data. The examples below show some common options, but a lot more combinations are possible.

aggregation 40 x 10 Gbit links with one EX 20400

Cubro now offers a "NEW" Packetmaster solution with 80 x 10 Gbit Ethernet ports.
The base unit is the EX 20400 with a new firmware that gives us the possibility to convert
a 40 Gbit port into 4 independent 10 Gbit ports.

Cubro NPB units support bypass function

The Cubro Bypass Application is a superior way to provide a fail-safe access port for an in-line monitoring appliance. From EX2 with Gbit up to EX 20400 with 100 Gbit bypass feature. With and without optical layer 1 switch support.

 

EX2 Multi Gbit Cooper aggregation

The Packetmaster EX2 can work as a dual link TAP with dual aggregation output, with filtering and load balancing, at the same time.