Items tagged with UP TO 100 GBIT

Packetmaster EX48400

Packetmaster EX48400

  • Carrier Grade Design
  • 4 x 100 Gbit + 2 x 40 Gbit + 48 x 1/10 Gbit or
    6 x 40 Gbit + 48 x 1/10 Gbit
  • SFP & SFP+ & QSFP
  • Layer 4 filtering + UDF filtering
  • Aggregation
  • L4 Traffic modification
  • GRE|VXLAN|NVGRE|MLAG|GENEVA
  • Session aware load balancing
  • Packet slicing in line rate
  • Port Bandwitdh: 1 Gbit | 10 Gbit | 40 Gbit | 100 Gbit
  • Part Nr #: CUB.PM-EX20400
Packetmaster EX20400

Packetmaster EX20400

  • Carrier Grade Design
  • 20 x 40 Gbit + 4 x 10 Gbit or
    4 x 100 Gbit +16 x 40 Gbit + 4 x 10 Gbit
  • SFP & SFP+ & QSFP
  • Layer 4 filtering + UDF filtering
  • GRE|VXLAN|NVGRE|MLAG|GENEVA
  • Aggregation
  • L4 Traffic modification
  • Session aware load balancing
  • Packet slicing in line rate
  • Port Bandwitdh: 1 Gbit | 10 Gbit | 40 Gbit | 100 Gbit
  • Part Nr #: CUB.PM-EX20400
Optical Bypass 40  & 100 Gbit multi mode

Optical Bypass 40 & 100 Gbit multi mode

MEMS based Optical switch for 40 Gbit and 100 Gbit multi mode links

  • Port Bandwitdh: 40 Gbit | 100 Gbit
MTP/MPO Tap for 40/100 Gbit (with 10 fibers) SR10

MTP/MPO Tap for 40/100 Gbit (with 10 fibers) SR10

  • Carrier Grade Design
  • fully transparent
  • up to 100 Gbit 
  • two MTP/MPO links per unit
  • patent pending
  • available in mm and sm 
  • Part Nr #: CBR.OPTO-MTP-1-SR10 | CBR.OPTO-MTP-2-SR10
OPTICAL TAP UP TO 100 Gbit 8 links multimode mtp

OPTICAL TAP UP TO 100 Gbit 8 links multimode mtp

  • Carrier Grade Design
  • fully transparent
  • up to 100 Gbit (see measurement)
  • new cabling approach
  • color coded adapters
  • patent pending
  • MTP output 
  • Part Nr #: CUB. OPTOSLIM-8-SM-5
MTP/MPO Tap for 40/100 Gbit (with 4 fibers)

MTP/MPO Tap for 40/100 Gbit (with 4 fibers)

  • Carrier Grade Design
  • fully transparent
  • up to 100 Gbit 
  • two MTP/MPO links per unit
  • patent pending
  • available in mm and sm 
  • Part Nr #: CBR.OPTO-MTP-1 | CBR.OPTO-MTP-2
OPTICAL BIDI TAP UP TO 100 Gbit 1 link single mode

OPTICAL BIDI TAP UP TO 100 Gbit 1 link single mode

Bidi TAP designed for lab and mobile use, fully transparent up to 100 Gbit 

  • Part Nr #: CBR.BIDI-SM-1
OPTICAL TAP UP TO 100 Gbit 1 link single mode

OPTICAL TAP UP TO 100 Gbit 1 link single mode

Designed for lab and mobil use, fully transparent up to 100 Gbit (see measurements)

  • Part Nr #: CBR.OPTO-1-SM
OPTICAL TAP UP TO 100 Gbit 8 links singlemode

OPTICAL TAP UP TO 100 Gbit 8 links singlemode

  • Carrier Grade Design
  • fully transparent
  • up to 100 Gbit (see measurement)
  • new cabling approach
  • color coded adapters
  • patent pending
  • Part Nr #: CUB. OPTOSLIM-8-SM
OPTICAL TAP UP TO 100 Gbit 4 links singlemode

OPTICAL TAP UP TO 100 Gbit 4 links singlemode

  • Carrier Grade Design
  • fully transparent
  • up to 100 Gbit (see measurement)
  • new cabling approach
  • color coded adapters
  • patent pending
  • Part Nr #: CUB. OPTOSLIM-4-SM
OPTICAL TAP UP TO 100 Gbit 8 links multimode

OPTICAL TAP UP TO 100 Gbit 8 links multimode

  • Carrier Grade Design
  • fully transparent
  • up to 100 Gbit (see measurement)
  • new cabling approach
  • color coded adapters
  • patent pending
  • Part Nr #: CUB. OPTOSLIM-8-SM-5
OPTICAL TAP UP TO 100 Gbit 4 links multimode

OPTICAL TAP UP TO 100 Gbit 4 links multimode

  • Carrier Grade Design
  • fully transparent
  • up to 100 Gbit (see measurement)
  • new cabling aproach
  • color coded adapters
  • patent pending
  • Part Nr #: CUB. OPTOSLIM-4-SM-5

Cubro Solutions

100 Gbit LR4 multiple splitting

Sometimes it is needed to tap a 100 Gbit LR4 link more than one time, this is not easy because the optical budget is too small to do that.

Amplification

You can enlarge the transfer range of your media dramatically without risking errors on your data. The examples below show some common options, but a lot more combinations are possible.

EX2 10 Gbit monitoring with load balanced output

Use the integrated optical TAP to connect to the live link and use the load balancing features to monitor the traffic

aggregation 40 x 10 Gbit links with one EX 20400

Cubro now offers a "NEW" Packetmaster solution with 80 x 10 Gbit Ethernet ports.
The base unit is the EX 20400 with a new firmware that gives us the possibility to convert
a 40 Gbit port into 4 independent 10 Gbit ports.

EX2 Multi Gbit Cooper aggregation

The Packetmaster EX2 can work as a dual link TAP with dual aggregation output, with filtering and load balancing, at the same time.

Aggregation of an 10 Gbit link and output to an 10 Gbit port

Aggregation of one 10 Gbit link with optical splitter to 10 Gbit fibre output

GRE de - encapsulation

Virtual environments needs virtual Taps, virtual Taps need GRE to send it over the virtual switchto a real monitoring device. All Packetmaster units can decapsulate GRE traffic to get the data in their original format.

Layer 1 Media Conversion

The Cubro 1/10 Gbit Media converter is a nice a simple tool to solve many problems in the daily network business. You can select the media by changing the SFP. The unique design supports also CWDM / DWDM and BIDI SFP.

Cubro NPB units support bypass function

The Cubro Bypass Application is a superior way to provide a fail-safe access port for an in-line monitoring appliance. From EX2 with Gbit up to EX 20400 with 100 Gbit bypass feature. With and without optical layer 1 switch support.

 

Aggregation of two 10 Gbit span ports to 1 10 Gbit output with EX2+

This application is normally not possible because the EX2+ has only two 10 Gbit ports and you need 3 to do this job.  But we at Cubro give our units some extra features to do this with two ports.

A optical ports has an transmitter and a receiver part, this two “ports” can be used separately in all Cubro NPB. The other feature what you need is the optical tap at the back.

Packetmaster as Patchfield

The Packetmaster EX can be used as intelligent patch field. This is feature is possible because the EX has no designated in and out port configuration. Each port is an input and an output at the same time.